ADM’s New Range of All-in-One UPS Power Supplies

ADM now stocks the ADEL System range of DIN rail mount DC UPS power supplies. 

Adel CBI2410A UPS Power Supply

These All-in-One UPS power supplies incorporate a DIN rail mounting switch mode power supply and UPS controller into a single unit. Customers can also buy a maintenance free battery pack and holder to create a cost effective and fully integrated UPS solution. 

You can browse our product range by clicking on the following link: 

UPS Power Supplies 

One of the main benefits of ADEL System’s UPS power supplies is that some can be networked via the ADELBus network using the  DPY351 controller.  

Adel DPY351 UPS Power Supply Monitor

The DPY351 is robust and equipped with a high-brightness and wide viewing-angle 3.5’’ TFT screen, which guarantees optimum visibility in any operating condition. The user interface is clear, intuitive and allows for configuration and management of the connected devices in a quick and straightforward way. 

Using the on-board Ethernet interface, it is possible to remotely manage the ADELBus network via the Internet with a PC or a mobile device. The DPY351 can also act as a gateway using standard protocols such as Modbus TCP/IP and SNMP. 

Fully Integrated UPS Power Supply Solution 

ADEL System’s ADELBus network allows you to manage all connected power supplies, with the following functionality: 

System Monitoring & Event Logging 

You can monitor and log the following data: 

  • Number of battery charging cycles 
  • Charge cycles completed 
  • Aborted charge cycles 
  • Ah charged 
  • Charging time 
  • Total number of transitions stand-by / back-up etc 
  • Status of Charging Battery 

 System Configuration 

  • The following parameters are fully configurable 
  • Charging curve 
  • Battery type 
  • Charging current Limit 
  • Enabling power supply function 
  • Timer 

Alarms and Recorder Management 

Enables you to: 

  • Setting alarm thresholds 
  • Receive message from other devices 
  • Record events 

Event Programming 

Actions can be coordinated across all connected devices, giving you a fully automated system. 

ADEL System DC UPS Features 

ADEL System UPS power supplies are available with 12V, 24V or 48V outputs, so you are certain to find a solution that is suitable for your application.  

They combine the functions of a power supply with those of a backup module and battery charger.  

They optimise the loading and unloading times of the battery without a deep discharge, the switching from the battery to the charger without any interruption and provide automatic protection without a fuse against reserve polarity, short circuit, overload and overvoltage.  

They carry out diagnostic checks on the battery through the Life Test function, enabling you to select the most appropriate charging curve to maximise the efficiency of your system, prolonging the life time of the battery whilst enhancing its performance.  

The supply of power is automatically allocated between the load and the battery being charged, with the charging rate being up to twice the rate of the rated output current.  

Visual indications are given for ‘power shortage’, ‘defective battery’, ‘battery voltage below 30%’, ‘battery charging level’. There is also a self-diagnostic function. These features make it easy to anticipate any potential issues, before they can cause a serious problem. 

The self-diagnosis function monitors for ‘overload’, ‘battery sulfation’, ‘reverse polarity connection’, ‘elements in short circuit’, ‘protection against short circuit’. 

ADEL System UPS power supplies are equipped with relays to warn of power outage and defective battery. 

3 charging levels are utilised: boost, trickle and recovery. It is possible to set boost and trickle remotely (on some units). 

Despite the high level of functionality offered, the ADEL System power supplies are compact, allowing you to fit more devices onto a single DIN rail. They will operate in ambient temperatures ranging from -10 to 70° C 

About ADEL System 

Founded in 1991, ADEL system develops and manufactures industrial linear and switch-mode power supplies and is recognized as one of the world's leading manufacturer of DC UPS and intelligent battery chargers.  

Today the ADEL system power supplies are used all around the worldwide. 

ADEL System’s investment in research & development ensure that they remain a market leader, meeting and exceed the ever-changing needs of our customers. 

Quality 

Even a relatively short interruption in current may cause technical and logistical damage to a system. Therefore, ADEL System maintains 100% control over their manufacturing processes, so that you have peace of mind that your power system will operate reliably. 

Every product is subject to final running in testing at maximum working voltage and current for 12-24 hours. This is over and above the testing that is required to meet electrical safety standards. 

ADEL System pay special attention to the components used in their products. Electrolytic capacitors with working temperatures of up to 105°C are used in ADEL System power supplies, and ADEL System have a specific laboratory for electromagnetic compatibility and safety testing.  

Further Information 

For further information on ADEL System’s UPS power supply solutions call ADM on 1300 236 467. A member of our expert team will gladly answer any questions that you may have. 

27 May 2019